Αναλογική I/O ενότητα F4-04AD F404AD KOYO Single-ended ή διαφορική

F4-04AD F404AD KOYO Analog I/O Module Single-ended or differential

Product Details

The F4-04AD Analog Input module provides several features and benefits.

 It is a direct replacement for the popular D4-04AD module, when properly configured.

 It accepts four differential voltage or current inputs.

 Analog inputs are optically isolated from PLC logic components.

 The module has a removable terminal block, so the module can be easily removed or changed without disconnecting the wiring.

 All four analog inputs may be read in one CPU scan (DL440/450 CPUs only).

 Broken transmitter detection is provided for current inputs

The F4–04AD Analog Input module requires either 16 or 32 discrete input points, depending on its operating mode (jumper selectable). The module can be installed in any slot of a DL405 system, including remote bases. The limitations on the number of analog modules are:

  For local and expansion systems, the available power budget and discrete I/O points are the limiting factors.

  For remote I/O systems, the available power budget and number of remote I/O points are the limiting factors.

Check the user manual for your particular model of CPU for more information regarding power budget and number of local or remote I/O points.

Specifications

Input Type: Single-ended or differential

Input Ranges: 0–5, 1–5, 0–10,
5,
10 VDC, 0–20, 4–20 mA.

Resolution: 12 bit (0 to 4095), unipolar 13 bit (
4095), bipolar

Input Impedance: 20 MΩ minimum, voltage input 250 Ω, 1/2W,
0.1%, 25 ppm/ C current input

Max. Continuous Overload: 50 VDC, voltage input,
45 mA, current input

Recommended External Fuse: 0.032A, Series 217 fast acting, current inputs

Common Mode Voltage Range:
10V maximum

Moore News

Metallurgical Industry Capability
Blast furnace ironmaking is the use of iron-containing raw materials (sinter, pellet or iron ore), fuel (coke, coal powder, etc.) and other auxiliary materials (limestone, dolomite, manganese ore, etc.)
The blast furnace is charged into a certain proportion, and hot air is blown into the blast furnace to help the coke burn, and the raw materials and fuel are lowered as the smelting process in the furnace progresses.
In the process of falling material and gas rising, heat transfer, reduction, melting and decarbonization occur successively to produce pig iron.
The impurities in the iron ore raw material are combined with the flux added to the furnace to form a slag, and the molten iron at the bottom of the furnace is intermittently discharged into the molten iron tank.
Sent to the steel mill. At the same time, it produces blast furnace gas and slag two by-products. After blast furnace slag water quenching, all of them are used as raw materials for cement production.

More Products   

Contact Us

miya@mvme.cn(Click)

Email: miya@mvme.cn

QQ: 2851195450

Tel: 86-18020776792

Skype: miyazheng52